The New Guitar Connector

The Importance of the Connector

The connector is one of the most delicate and important parts of a guitar.
It is connected and disconnected daily, and the forces of playing are constantly transferred from the flexible instrument to the rigid world of cables and equipment.

It is also where the most delicate signals of your playing leave the guitar and enter the signal chain. A connector is never “just a connector”.

The Downsides of the 1/4″ Standard

For a very long time, the only guitar connector was the 1/4″ phone jack.
Originally designed for fast operation in telephone switchboards, it appears ideal for quick connections.

Paradoxically, on stage it is slow.
Because the hot signal is located at the tip, connecting or disconnecting requires muting the channel first — and unmuting afterwards. In practice, this often means shouting across the stage and waiting for the technician. The musical flow is interrupted.

In addition, the 1/4″ jack offers:

•    Only a single signal line
•    No power supply
•    No stereo
•    No control or auxiliary signals

Other Connector Standards Since the 1960s

Microphones received a far superior connector: XLR.
It is balanced, hum-free (ground connects first), supports phantom power, locks securely, and is extremely robust — but it is too large for most guitars.

Later came the desire to transmit each string separately:

•    ARP’s LEMO connector is excellent but expensive and limited to 7 pins.
•    Roland’s 24-pin rectangular connector is another option.
•    Paradis’ Neutricon is very solid but limited to 8 pins.
•    Roland’s 13-pin DIN (GK) was introduced around 1985.

The 13-pin DIN became widely adopted, but it has weaknesses: it does not tolerate being stepped on, it can be connected the wrong way with enough force, and its ground connection relies on a ring contact that easily oxidizes — often causing crackling and unreliable operation.

Origin of the New Connector

For decades, Paradis searched for a better connector solution.
The decisive step came when Synquanon and Synth-Linx proposed using a modern locking multi-pin connector derived from professional medical and scientific equipment.

The Swiss company LEMO, founded in 1946, developed this locking principle for the watch industry. Its connectors became a standard in medical and scientific applications due to their precision, reliability, and durability. After the patent expired in 1999, high-quality compatible versions became available at a fraction of the original cost, making this technology practical for musical instruments.

Compatibility and Expansion

This connector is fully backward-compatible with the 13-pin guitar standard.
Existing guitars and equipment can be upgraded using adapter cables or interface boxes — without soldering.

At the same time, the connector provides two additional pins, enabling:

•    Support for a 7th string
•    Additional pickups or microphones
•    Control signals or integrated effects
•    Future expansion without redefining the connector

Key Advantages

•    Silent connection and disconnection
•    Secure locking to prevent accidental unplugging
•    Impossible to connect the wrong way, unlike 13-pin DIN connectors
•    Extreme mechanical durability, can withstand stepping on
•    Dedicated ground pin and gold-plated contacts
•    Multiple signals in one connector
•    Smaller than most 1/4” jacks
•    Simple retrofit: remove four screws, connect a flat cable, no soldering required.

An Open Proposal

This is not a proprietary connector for a single brand.
It is a proposal for a modern, global guitar connector standard, designed to respect existing systems while finally allowing them to evolve.